1 copyright ? 2010, everlight all rights reserved. re lease date : july.10.2013. issue no: dir-0000986 www.everlight.com technical data sheet top infrared led ir67-21c/tr8 features ? compatible with infrared and vapor phase reflow sol der process. ? low forward voltage. ? view angle 120 ? pb free ? the product itself will remain within rohs complian t version. description ? ir67-21c/tr8 is an infrared emitting diode in mini ature smd package which is molded in a water clear plastic with flat top view lens ? the device is spectrally matched with silicon phot odiode and phototransistor. applications ? sensor ? optoelectronic switch ? camera ? vcr ? video ? smoke detector device selection guide device no. chip material lens color ir67-21c/tr8 gaalas water clear
datasheet ir67-21c/tr8 2 copyright ? 2010, everlight all rights reserved. re lease date : july.10.2013. issue no: dir-0000986 www.everlight.com package dimensions notes: 1.all dimensions are in millimeters 2.tolerances unless dimensions 0.1mm absolute maximum ratings (ta=25 ) parameter symbol rating unit continuous forward current i f 65 ma peak forward current *1 i fp 1.0 a reverse voltage v r 5 v operating temperature t opr -40 ~ +85 storage temperature t stg -40 ~ +100 soldering temperature *2 t sol 260 power dissipation at(or below) 25 free air temperature p d 130 mw temperature resistance junction ambient rthj-a 400 k/w notes: *1: i fp conditions--pulse width Q 100 s and duty Q 1%. *2: soldering time Q 5 seconds.
datasheet ir67-21c/tr8 3 copyright ? 2010, everlight all rights reserved. re lease date : july.10.2013. issue no: dir-0000986 www.everlight.com electro -optical characteristics (ta=25 ) parameter symbol min. typ. max. unit condition radiant intensity ie 1.0 1.5 -- mw /sr i f =20ma 4 8 20 . i f =100ma pulse width Q 100 s ,duty Q 1% peak wavelength p -- 940 -- nm i f =100ma spectral bandwidth ? -- 45 -- nm i f =100ma forward voltage v f -- 1.2 1.5 v i f =20ma -- 1.4 1.8 i f =100ma pulse width Q 100 s ,duty Q 1% reverse current i r -- -- 10 a v r =5v view angle 2 1/2 -- 120 -- deg i f =20ma
datasheet ir67-21c/tr8 4 copyright ? 2010, everlight all rights reserved. re lease date : july.10.2013. issue no: dir-0000986 www.everlight.com 0 -25 0 40 20 60 100 80 20 40 60 100 80 120 140 0 10 1 10 10 2 3 10 4 2 1 3 4 5 6 7 8 880 0 20 40 60 80 100 980 940 900 920 960 1020 1000 1040 i f =20ma ta=25c typical electrical/optical/characteristics curves f or ir power dissipation vs. ambient temperature spectral distribution peak emission wavelength vs. ambient temperature forward current vs. forward voltage 75 -25 900 0 920 940 25 50 960 980 100
datasheet ir67-21c/tr8 5 copyright ? 2010, everlight all rights reserved. re lease date : july.10.2013. issue no: dir-0000986 www.everlight.com 0 10 20 30 40 50 60 70 80 90 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 relative radiant intensity angle(degree) relative radiant intensity vs. angular displacement
datasheet ir67-21c/tr8 6 copyright ? 2010, everlight all rights reserved. re lease date : july.10.2013. issue no: dir-0000986 www.everlight.com precautions for use 1. over-current-proof customer must apply resistors for protection , othe rwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the produ cts are ready to use. 2.2 before opening the package, the leds should be kept at 30 or less and 90%rh or less. 2.3 the leds should be used within a year. 2.4 after opening the package, the leds should be k ept at 30 or less and 70%rh or less. 2.5 the leds should be used within 168 hours (7 day s) after opening the package 2.6 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the stora ge time, baking treatment should be performed using th e following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than t wo times. 3.3 when soldering, do not put stress on the leds d uring heating. 3.4 after soldering, do not warp the circuit board.
datasheet ir67-21c/tr8 7 copyright ? 2010, everlight all rights reserved. re lease date : july.10.2013. issue no: dir-0000986 www.everlight.com 4. soldering iron each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do solder ing of each terminal. be careful because the damage of the product is often started at the time of the han d solder. 5. repairing repair should not be done after the leds have b een soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be dam aged by repairing.
datasheet ir67-21c/tr8 8 copyright ? 2010, everlight all rights reserved. re lease date : july.10.2013. issue no: dir-0000986 www.everlight.com package dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm 2. carrier tape dimensions:(quantity: 2000pcs/reel) note: the tolerances unless mentioned is 0.1mm ,unit = mm
datasheet ir67-21c/tr8 9 copyright ? 2010, everlight all rights reserved. re lease date : july.10.2013. issue no: dir-0000986 www.everlight.com rohs pb cpn : p n : xxxxxxxxxxxxx xxxxxxxxxxxxx qty : xxx lot no : xxxxxxxxxx reference : xxxxxxxx cat : xxx hue : xxx ref : xxx everlight packing procedure aluminum moistue-proof bag label desiccant label label form specification cpn: customer?s production number p/n : production number qty: packing quantity cat: ranks hue: peak wavelength ref: reference lot no: lot number made in taiwan: production place notes 1. above specification may be changed without notice. everlight will reserve authority on material change for above specification. 2. when using this product, please observe the absolut e maximum ratings and the instructions for using outlined in these specification sheets. e verlight assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in th ese specification sheets. 3. these specification sheets include materials protec ted under copyright of everlight corporation. pleas e don?t reproduce or cause anyone to reproduce them w ithout everlight?s consent. everlight electronics co., ltd. tel: 886-2-2685-6688 office: no 6-8, zhonghua rd., shulin dist., fax : 886-2-2685-6699 new taipei city 23860, taiwan, r.o.c http: //www.everlight.com
|
